Konfigurasi Router 1 :
--- System Configuration Dialog ---
Continue with configuration dialog? [yes/no]: no
Press RETURN to get started!
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with
CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 172.16.1.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#int ser2/0
Router(config-if)#ip add 172.16.3.1 255.255.255.252
Router(config-if)#clock rate 64000
Router(config-if)#no shutdown
Router(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0,
changed state to up
exit
Router(config)#int ser 3/0
Router(config-if)#ip add 192.168.10.5 255.255.255.252
Router(config-if)#clock rate 64000
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
%LINK-5-CHANGED: Interface Serial3/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial3/0,
changed state to up
Konfigurasi Router 2 :
--- System Configuration Dialog ---
Continue with configuration dialog? [yes/no]: no
Press RETURN to get started!
Router>enable
Router#conf t
Enter configuration commands, one per line. End with
CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 192.168.2.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to
up
%LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/0, changed state to up
exit
Router(config)#int ser 2/0
Router(config-if)#ip add 172.16.3.2 255.255.255.252
Router(config-if)#no shutdown
%LINK-5-CHANGED: Interface Serial2/0, changed state to up
Router(config-if)#exit
Router(config)#int ser3/0
Router(config-if)#ip add 192.168.10.9 255.255.255.252
Router(config-if)#clock rate 64000
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0,
changed state to up
%LINK-5-CHANGED: Interface Serial3/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial3/0,
changed state to up
Konfigurasi Router 3 :
--- System Configuration Dialog ---
Continue with configuration dialog? [yes/no]: no
Press RETURN to get started!
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with
CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 192.168.1.1 255.255.255.0
Router(config-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to
up
Router(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/0, changed state to up
exit
Router(config)#int ser2/0
Router(config-if)#ip add 192.168.10.6 255.255.255.252
Router(config-if)#no shutdown
Router(config-if)#
%LINK-5-CHANGED: Interface Serial2/0, changed state to up
exit
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0,
changed state to up
Router(config)#int ser 3/0
Router(config-if)#ip add 192.168.10.10 255.255.255.252
Router(config-if)#no shutdown
%LINK-5-CHANGED: Interface Serial3/0, changed state to up
Router(config-if)#exit
Router(config)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial3/0,
changed state to up
Konfigurasi EIGRP pada Router 1 :
Router(config)#router eigrp 10
Router(config-router)#network 172.16.1.0 0.0.0.255
Router(config-router)#network 172.16.3.0 0.0.0.3
Router(config-router)#network 192.168.10.4 0.0.0.3
Router(config-router)#exit
Router(config)#exit
Router#
%SYS-5-CONFIG_I: Configured from console by console
Konfigurasi EIGRP pada Router 2 :
Router(config)#router eigrp 10
Router(config-router)#network 192.168.2.0 0.0.0.255
Router(config-router)#network 172.16.3.0 0.0.0.3
Router(config-router)#
%DUAL-5-NBRCHANGE: IP-EIGRP 10: Neighbor 172.16.3.1
(Serial2/0) is up: new adjacency
Router(config-router)#network 192.168.10.8 0.0.0.3
Router(config-router)#exit
Router(config)#
%DUAL-5-NBRCHANGE: IP-EIGRP 10: Neighbor 192.168.10.10
(Serial3/0) is up: new adjacency
Konfigurasi EIGRP pada Router 3 :
Router(config)#router eigrp 10
Router(config-router)#network 192.168.1.0 0.0.0.255
Router(config-router)#network 192.168.10.4 0.0.0.3
Router(config-router)#
%DUAL-5-NBRCHANGE: IP-EIGRP 10: Neighbor 192.168.10.5
(Serial2/0) is up: new adjacency
Router(config-router)#network 192.168.10.8 0.0.0.3
Router(config-router)#
%DUAL-5-NBRCHANGE: IP-EIGRP 10: Neighbor 192.168.10.9
(Serial3/0) is up: new adjacency
Router(config-router)#exit
Router(config)#
Konfigurasi PC1 :
IP Address : 172.16.1.5
Subnet mask : 255.255.255.0
Gateway : 172.16.1.1
Konfigurasi PC2 :
IP Address : 192.168.2.5
Subnet mask : 255.255.255.0
Gateway : 192.168.2.1
Konfigurasi PC3 :
IP Address :
192.168.1.5
Subnet mask : 255.255.255.0
Gateway :
192.168.1.1
Gambar Ping PC1
ke PC2
Gambar Ping PC1 ke PC3
Gambar Ping PC3 ke PC2
Gambar Pengiriman data Successful
